Choose a honey bunny, a gray lop rabbit or a patchwork character. There are twelve different half masks: six ready in color and six to decorate. Each has A4 and Letter PDFs in two trial widths.
Files are available for trial printing. Physical printing and fitting have not yet been confirmed: check the ruler, eye-opening position and clear vision first. Child and adult labels do not guarantee a fit by age.
Masks shown: 12 · Child size
Color · width 160 mm
Cut the broad upright ears in a smooth curve. Leave the cream forehead patch intact.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 69.3 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color · width 160 mm
Support each broad drooping ear as you turn the sheet. Do not cut out the gray panels.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 50.2 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color · width 160 mm
The folded tip belongs to the silhouette. Do not cut the printed fold line.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 69.4 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color · width 160 mm
The large patches are decoration. Cut the complete contour including the wide ears.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 64.7 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color · width 160 mm
Keep the broad forehead tuft attached. Interior strokes are not cutting lines.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 67 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color · width 160 mm
Both broad ears stay attached. Turn the sheet around the rounded tips.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 54.4 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
Color the large tall-ear panels before cutting. Do not add extra openings.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 69.6 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
Repeat one color on the ears and another across the brow band. Cut only the outside contour.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 63.6 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
Color the folded tips in a contrasting color. Leave the fold lines intact.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 63.6 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
Try the same pattern on the different ears. Keep the short drooping ear attached.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 66.9 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
The broad forehead waves make a fluffy edge. Cut smooth curves and leave internal lines intact.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 67 mm. A trial-fitting size, not a universal fit.
PNG ↓
Color-in · width 160 mm
Choose colors for the three large spots. Cut the broad fan-shaped ears as part of the mask.
Check the eye-opening centres and clear nose and mouth. If an edge presses or blocks sideways vision, remove the mask and try another size.
Eye-opening centre distance: 59.2 mm. A trial-fitting size, not a universal fit.
PNG ↓The six color masks include a honey bunny with upright ears, a gray lop rabbit, a bunny with one folded tip, a patchwork rabbit with wide ears, a lilac character with a forehead tuft and a peach round-lop bunny. Six more constructions are ready to color: tall ears, outward ears, two folded tips, asymmetric ears, a fluffy brow and fan-shaped ears. Choose by the outline: smooth curves are useful for early cutting practice. These designs differ in construction rather than only in their colors.
Color while the sheet is whole: it is easy to hold and the edges do not curl yet. Pick two or three colors, fill the larger pattern panels first, then add stripes or spots inside printed zones. Leave the white eye openings empty. The thick outer line defines the cutting contour; internal pattern lines stay intact. Small circles at the sides show where an adult can make fastening holes. They differ from the larger openings used for vision. Keep dangling decorations away from the openings.
The selector above the cards changes every bunny download together. The child version measures 160 mm across the visible outer contour; the adult version measures 185 mm. The eye-opening centre distance appears in the card and on the sheet. These are two trial-fitting options, not universal face sizes. An adult may prefer the smaller one, while neither may fit a particular child. Judge the actual fit rather than the label.
Choose A4 or Letter to match your printer paper. Print the PDF at 100%, with “Fit to page” disabled. Measure the control line: it should be exactly 50 mm. If it is shorter, check paper format and scaling before repeating one sheet. PNG is useful for viewing, but browser printing can change its dimensions, so use the PDF for a measured fitting.
Prepare paper, thin card, glue, scissors, paper tape and soft elastic or a broad paper handle. Check the printer instructions before using heavy paper. Color a black-and-white mask before cutting. If the shape feels floppy, glue it to thin card and let it dry completely. A damp sheet bends and tears more easily.
Cut the outer contour, turning the paper to keep the scissors comfortable. Leave internal pattern lines intact. If a ear tears, reinforce the back with paper tape. An adult cuts the eye openings and side fastening holes; children do not need to pierce the sheet with scissors. Hold the mask to the face without fastening it first and check that the eyes look through the middle of the openings.
The lower notch leaves room for the nose. Keep the nose and mouth open; edges must not touch the eyes or press on the bridge of the nose. Check forward and sideways vision. If the openings do not line up, remove the mask and try the other size. Tightening elastic does not correct eye spacing: it only presses the paper closer to the face.
Reinforce the side fastening marks on the back, then ask an adult to fit elastic without tension. The mask should come away in one movement. Alternatively, glue a broad paper handle to one side so you can hold it in front of the face and move it away quickly. Check while seated before starting a scene. If it slips, take it off and adjust the fastening, rather than holding it near the eyes.
Give your bunny a name and a character: one is curious, another calm, and another likes looking for carrots. Let two characters meet in a woodland clearing and find their way home together. Swap roles and tell the same story from the other character’s viewpoint. Next invent a pattern: repeat one color inside the ears and a second across the broad forehead band. Explain how your pattern makes the character recognizable. For scenes involving movement, hold the mask in front of you like a puppet. Do not run while wearing a mask; remove it immediately if it feels uncomfortable.
Exactly 12: 6 color and 6 color-in designs. Child and adult PDFs are size options for the same project, not extra drawings.
Choose “Adult · 185 mm” above the cards and press “Show”. The A4 and Letter buttons then download adult files. The child width is 160 mm.
One page with a dimensioned mask, short instructions, a 50 mm control line and a Kiduverse link. The 96 files differ by design, language, physical width or paper format.
Only the two eye openings and small side fastening holes, with an adult doing the cutting. Leave internal pattern and pattern lines intact.
Check scaling with the 50 mm control line and try the other size. Enlarging changes the eye spacing too. Do not use a mask if edges touch the eyes or obstruct vision.
Yes. Attach a broad paper handle to one side and hold the mask in front of the face. Check that the handle is secure and the mask moves away easily.
kiduverse